Forming Speed 8-12m/min Color Steel Tile Roll Forming Machine Hydraulic Cut PLC
1. Description of LBM-GTM-009 type color steel tile roll forming machine:
Color steel tile has the good characteristics, such as light weight, high strength, colorful, easy installation, anti-seismic, fire-proofing, rain-proof, long service life, maintenance free, etc. Now, it is widely popularized and used. This machine is suit for the production of various kinds of color steel tiles.
LBM factory is producing high quality color steel tile roll forming machines. Most of the machines were exported to Thailand, Singapore India, Vietnam, Iran, Russia, Ghana, Tanzania, etc.
2. Detailed parameters of LBM-GTM-009 type color steel tile roll forming machine
| Suitable Raw Material |
| Material | PPGI and PPGL Coils, Hot rolled & Cold rolled coil |
| Thickness | 0.3-0.8mm |
| Coil width | 1000mm, 1220mm, 1450mm |
| Yield Strength | 235Mpa-550Mpa |
| Main Technical Parameters |
| Quantity of forming rollers stations | 20 |
| Diameter of forming rollers shafts | 70 mm |
| Roll Forming Speed | 10-16m/min |
| Forming rollers material | No.45 steel, coated with chromed treatment |
| Cutter material | CR12 mould steel, with quenched treatment |
| Controlling system | PLC and Converter |
| Electric Power requirement | Main motor power: 5.5 Kw |
| Electric voltage | 380V 50HZ 3 Phase (or custom) |
3. Main components of LBM-GTM-009 type color steel tile roll forming machine
| Manual Decoiler | 1 Set |
| Feeding guiding device | 1 Set |
| Leveling System | 1 Set |
| Roll Forming System | 1 Set |
| Hydraulic Cutting System | 1 Set |
4. Panel sketch
5. Service
· 5 engineers with more than 20 years experience
· 30 professional technician
· 22 sets advanced CNC production lines on site
· Installation engineers can reach your factory within 6 days
· 3 years maintenance and whole life technical support
· Free accessories can be offered to you during the warranty period
6. Introduction of main components:
1). Hydraulic cutting
2). Puching part:
| Power | 4kw (double valve) |
| Cylinder | 2 |
| Material: | Cr12 quenching |
| Quantity | 2 |
Usage: Punching is added to the flying saw cutting part, by the hydraulic control, mainly in the red c-shaped steel in the hole based, can be set up according to their needs, can be washed from time to punch, simple to use, the durability.
3). Hydralic Station:
| Power | 3kw |
| Hydraulic oil | 46# |
Usage: It is controlled by gear wheel oil pump. Afer filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job
7. Product Picture
Product Tags:
|
|
Stable Transmission Roof Tile Manufacturing Machine 8-12m/Min Forming Speed Images
|
